Shanghai UPG International Trading Co., Ltd

Model Number: 6-30 blower Brand Name: Tong Tian Key Specifications/Special Features: 6-30 type centrifugal fan is generally used for granular or powder materials pneumatic transportation, is often used for lining without corrosive gas, no air containing viscous materialMedium temperature is generally not more than 50℃ (highest do not exceed 80℃), the dust content in the medium and hard particle is not more than 150mg/m afterBecause of its high pressure and flow rate is small, so for some objects such as grain, cotton quality lighter transport has very good effect6-30 type centrifugal fan for single suction, number (there are number 5 a, 6 a, 5 c, 6, 7, 8, 9 c c c c seven, fan can be made into spin to divided into left and right two, the distinguish method is that, from the transmission direction of impeller in the face, the fan impeller clockwise while working for a right-handed and vice is left-handedOutlet direction of the fan are usually made from 90 degree to facilitate client installation, debugging, and at the same time the supply of steel structure overall stents and vibration reductionFan impeller diameter of decimeter number is the number of fan, expressed with Arabic numeralsImmediately after the letters fan mode of transmission, transmission methods commonly used are: "A" type, said with A motor to drive straight league (impeller is installed on the motor shaft)"C" type, said fan cantilever, pulley drive on the outside of the bearing"D" type, said fan bracket, support, coupling transmission